WATER BASE PAINT
Putty applications :
Pigmatron PT added in to White Cement base Putty OR in Gypsum OR in Synthetic water base Putty for plaster applications.
Emulsion Paint :
Pigmatron PT added to water base polymer emulsions for paint applications
Pavers Making :
Pigmatron CDR useful in mixture colour pavers and added either in the mixture of Pavers raw material mixture or surface applications.
Industrial Flouring :
Pigmatron CDR can be used in the concreate flouring either used with concrete or with finishing white cement and Pigmatron CDR with TRIMIX finishing.
Normally the Grey Cement makes change in the original shade and dull the Brightness of the Pigment so either White Cement OR GGBS ( Ground Granulated Blast Furnace slag ) should be added in Grey cement proportionately to achieve Brilliant and attractive effect.
- Storage Stability is excellent.
- Normally it is observed in Pigment emulsion / liquid are dried if the packing is open so it is difficult to redisperse.
- The particle sizes are finer so more coverage in Pigmatron CDR / PT Powder.
- Some time on storage the heavy particles are settled and separated in Pigment emulsion / liquid.
- There is higher Pigment concentration in Pigmatron CDR / PT Powder compared to normal Pigment emulsion / liquid.
- The logistic cost is very low compared to Pigment emulsion / liquid.
1. Ordinary Portland Cement : 500 gms.
2. GGBS : 500 gms.
3. Sand : 2000 gms.
4. Small Stone ( Cupchy ) : 2000 gms.
5. Grit : 2000 gms.
6. Pigmatron CDR : X gms ( As per Shade Require )
7. Water : 1000 gms.
The material is mix in Concrete making machine and make a mould of mixture for 24 hours and curing in water for 28 days to achieve maximum strength.
1. Ordinary Portland Cement : 500 gms.
2. GGBS : 500 gms.
3. Superfined Sand : 2000 gms.
4. Pigmatron CDR : X gms. (As per shade Require)
5. Water : 500 gms.
The material is mix in Concrete making machine and make a mould of mixture for 24 hours and curing in water for 28 days to achieve desire shade and maximum strength.
1. White Cement base Putty OR Gypsum : 1000 gms.
2. Pigmatron PT : X gms. (As per shade Require)
3. Water : 400 gms.
The mixture is stirred for 10 minutes before applying on masonry wall. Water can be adjusted as per viscosity require for application.
1. Polymer Emulsion Water base Paint : 1000 gms.
2. Pigmatron PT : X gms. (As per shade Require)
3. Water : 50 gms.
Add Pigmatron PT in Polymer emulsion for paint application with 50 gm. of water with 5-10 minutes stirring.
We did not try in the laboratory for the Pavers and Industrial flooring applications, but we do have experience at customer end to achieve the results.
| Product Code | Name Of The Product | C.I.No. Pigment | 10 Gm/Kg | 40 Gm/Kg |
| 1005 | Pigmatron Yellow G | Y-74 |  |  |
| 1006 | Pigmatron Yellow RB | Y-83 |  |  |
| 3002 | Pigmatron Red R | R-112 |  |  |
| 3011 | Pigmatron Red BL | R-122 |  |  |
| 8003 | Pigmatron Violet R | V-19 |  |  |
| 8001 | Pigmatron Violet BL | V-23 |  |  |
| 4000 | Pigmatron Blue R | BI-15.0 |  |  |
| 4003 | Pigmatron Blue G | BI-15.3 |  |  |
- Tailor made shades available on request.
- Shades shown here are scanned shade from original laboratory sample shade.